Feeds:
Posts
Comments

Posts Tagged ‘Porter’

I brewed what was supposed to be a Black Butte Porter clone back in September.  It wasn’t cloned, but it just might be the best beer I have made to date.  So I’m going to brew it again, Today!  I just need to get some thoughts down.

Last time, due to an ordering oversight, I had to change the recipe slightly.  I didn’t order enough Crystal 80, so I made up the difference with some 120 I had left over sitting around.

  • 6# Light LME
  • 1.5# Muntons 55/45 Wheat DME
  • 8 oz Crystal 80
  • ~3 oz Crystal 120
  • 6 oz Pale Chocolate Malt – 200L
  • 6 oz Chocolate Malt -350L
  • 4 oz Cara-pils
  • .5 oz Galena (60 min)
  • .25 oz Cascade (30 min)
  • .25 oz Mt. Hood (5 min)
  • Wyeast 1968 London ESB
  • 2 stage starter – 800 mL, 2000 mL (I want ALOT of yeast)

Last time around, I had this beer in the keg and carbonated (very forced) in 10 days.  It’s the quickest I have gone from kettle to glass.

That is my secondary goal this time around as well.  Kettle to glass in 10 days.  The primary goal being a duplication of the beer; this will be the first time I have brewed a recipe twice.

The 10 day schedule will hopefully look something like this.

  • Day 1 / Brew
  • Day 1-6 / Ferment
  • Day 7-8 / Cold Crash
  • Day 9 / Carbonate
  • Day 10 / Drink

With the amount of yeast I have in the starter, it should be no problem at all getting to Terminal Gravity in 6 Days.  It’ll probably be one in less than 4.  And the wonderful thing about the 1968 yeast strain is how well it clears.  The first stage of the starter was clear after being in the fridge for only 12 hours.

I’ll update this post tomorrow with pics and progress, but for now I’ll leave you with how the second stage of the starter looked this morning after only 10 hours.

Cheers,

ND

Advertisements

Read Full Post »

Update: Not cloned (see comments), but super Delicious!

One of the podcasts I listen to is The Jamil Show – Can You Brew It, over on The Brewing Network.  A couple of episodes ago they cloned Deschutes Black Butte Porter.  I’ve only had this beer once, but really enjoyed the one bottle I had.  Needless to say, I was pretty excited to hear they were going to be brewing it.

I’m planning on trying to brew Tasty’s Black Butte clone, but instead of all-grain, am going to do an extract version.

I think I’ve pretty much got the recipe formulated. The hardest part was getting the wheat malt percentage. In the original recipe from Tasty, 10% of the grist was wheat. When it comes from extract only around half is wheat. Muntons wheat DME is 55% wheat, so at 16.2% of the grist, about 9% would be wheat. I think that’s pretty darn close. The only concern I have would be fermentability with the extract, so I dropped the Carapils down to 4 oz instead of keeping it the same as the chocolate malts.

I’m actually happy with how simple I got all the ingredient quantities.  Here’s the recipe according to ProMash. Tell me what you think.

5.5 Gal. Batch
SG 1.058
IBU’s 34.9 Rager, SRM 24.1
90 minute boil.

Grain Bill
6 lbs Briess Golden LME 64.8%
1.5 lbs Muntons Wheat (55/45) DME 16.2%
12 oz crystal 80 8.1%
6 oz chocolate malt 350L 4.1%
6 oz pale chocolate malt 200L 4.1%
4 oz Carapils 2.7%

Hops
.50 oz Galena 90 minutes
.25 oz Cascade 30 minutes
.25 oz Mount Hood 5 minutes

Yeast
WLP002 English Ale

Cheers!

Update: Not cloned.  It’s too light and not enough hop character.  I think the chocolate malt needs to be adjusted.  Maybe 450 and 350 Lovibond instead of the 200.  I don’t really know what to do about the hops.  Perhaps the change to malt will help excentuate the hop character.

Read Full Post »

At the beginning of the year I brewed a porter.  I went to a LHBS with no idea of what I was wanting to brew and just kinda winged it.  I grabbed this and that, but tried to keep it simple.  When the beer was young, I really liked it.  All the flavors were really subtle and it wasn’t too dark.  But as it matured a couple more months, it became a completely different beast.  Much more robust.  Roastier.  Completely black.  And the hops really started showing themselves.  And I fell in love.  But it’s a love/hate relationship.  This beer is fantastic, but only on days when I’m in the mood for it’s fury.  When I’m not, it is just too much.

NDBrew Porter:

  • 6 lbs Dark LME
  • 1 lbs Dark DME
  • .5 lbs Chocolate Malt
  • .5 lbs Crystal 120
  • .5 oz Columbus pellets (60 min)
  • 1 oz Cascade pellets (5 min)

I made a 2L starter with half of the DME and pitched the whole thing.  The yeast was the problem with this brew.  I picked up a vial of White Labs WLP 001 and pitched it in the starter.  After 18 hours I had no activity (after looking at the vial, it was past the exp date by about 2 months).  After briefly panicking I remember I had a brown ale downstairs with some Wyeast 1028 in a secondary.  So I racked the brown off the cake and added some of the 1028 to my starter with the 001 still in it.  I went about the brew day trying not to worry about it.  When it was time to pitch, the starter was going crazy.  So I can’t really tell you what yeast to use.  I’m sure there was a contribution by some of the 001 but the majority of the ferment was done by the 1028.  Either way, this is a great beer, and I’m sure that picking either one of the yeast will still yield a very drinkable brew.

Cheers!

Read Full Post »